Each Tune Audio ANIMA utilises a 15" woofer and 5" mid modified in house, and a 1" compression driver with neodymium magnet and titanium diaphragm for high frequencies.
ANIMA's distinguished design is built around its bass horn which stands tall and fires to the floor. Mid height on the side you have a mid range horn and on top the high range horn. Both bass and mid horns are built from Baltic birch plywood while the high horn is built from their proprietary epoxy compound. Crossovers are located on the bottom of the bass horn. This allows the crossover parts be well spaced to avoid any kind of interference and distant from any driver's magnetic field. All components are hard wired.
All internal wiring is made of from high purity OFC copper with waxed cotton insulation. Brass bracing parts with felt acoustic isolation is used to minimise vibrations transfer on contact of the different horns. Horns are mechanically time aligned for time coherent result. For mid and high frequencies, level adjustments are available to the user making it possible to fine tune ANIMA to the listening room. Beaming of the high frequencies horn is also available to fine tune for the listening position.
Low to mid-powered valve or solid state amplifiers with low or no feedback are recommended. Near wall or room corner placement is also recommended.
Almost any colour or veneer combination is possible with Tune Audio speakers, please contact us for more details.
|Drivers:||15" + 5" + 1" compression driver with titanium diaphragm|
|Sensitivity:||109dB @ 8ohms|
|Crossover Freq:||250Hz and 1.5kHz|
|Dimensions:||158 x 87 x 87cm (HxWxD)|
|Power required:||3 watt recommended min|