Created with Sketch. Created with Sketch.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.


  • VPI Crosscheck turntable level

    Level your turntable with VPI's Crosscheck Turntable Level.  Leveling a turntable is essential to ensure proper performance. The platter's constant speed, cartridge's tracking ability and the tonearm's smooth motion can all be affected if the...

    Add to Cart
  • VPI headshell weight

    The VPI Headshell Weight, designed for use with VPI JMW tonearms, allows lighter cartridges to be used on heavy tonearms, such as the 10" and longer JMW tonearms. The 3 gram headshell weight may also be used on very...

    Add to Cart
  • VPI cork mat

    The self-stick VPI Cork Mat is made to replace the mat on a VPI 16.5 or 17F cleaning machine. It can also be used as a replacement mat on many turntable platters. The most common use is as an extra clean cork mat to put on your record cleaning machine...

    Add to Cart
  • VPI record cleaning fluid

    VPI's concentrated record cleaning machine fluid is the same fluid included in their RCMs.  This 30ml bottle makes 4 litres of fluid when mixed with distilled or demineralised water.

    Add to Cart
  • SOTA Drive Belts

    Worn belts are the largest contributor to turntable speed fluctuations which destroy your soundstage and cause pitch instability. Use our genuine SOTA drive belt for best results on your SOTA turntable.  Select from the drop-down menu for pricing...

    Add to Cart
  • VPI replacement drive belts

    VPI replacement drive belts

    Standard Replacement Drive Belts For VPI Turntables This is an OEM Replacement for VPI turntables.  Price is for 1, or 1 full set of belts to suit.  Single belt models = $57 each Multi-belt models = $73 per full kit   Note: Aries...

    Choose Options
  • VPI Magic Lube bearing grease

    Keep Your VPI Table Spinning Freely With Super Lube!  Super Lube is the same bearing grease used on all VPI turntables, only a very small amount is necessary to maintain optimum performance.

    Add to Cart
  • VPI periphery ring belts

    The belts on the VPI periphery clamp will over time wear out, replace them with these.  Two belts are included in this package.

    Add to Cart
  • VPI record cleaning brush

    Replacement brush for all VPI 16-Series record cleaning machines. This is the brush included with every 16 series VPI RCM. If your brush has gotten dirty or the bristles have become brittle, replace it with this OEM replacement brush...

    Add to Cart
  • VPI 45rpm spindle adaptor

    Essentially a clamp for 45RPM records, the 45RPM Spindle Adapter threads over the spindle of all VPI Record Cleaning Machines and screws down to firmly hold 45RPM discs in place while cleaning.

    Add to Cart
  • VPI Tube and holder for 7" LPs

    Enable your VPI 16.5 vacuum record cleaning machine to work with 45rpm (7'') records. Kit includes a 45rpm vacuum tube, tube holder and 45RPM spindle adaptor.

    Add to Cart
  • DS Audio ST-50 stylus cleaner

    If you have a turntable, you NEED THIS! We've tried them all, and our preferred solution is the silicone pad stylus cleaners. They're simply the most gentle on your stylus. The only caveat is that they won't remove grit that is hardened and stuck to...

    Add to Cart
  • VPI Alignment protractor / jig

    The VPI Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The VPI Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang. Available in 9, 10 or 12" versions...

    Choose Options