Accessories

Ortofon cartridge alignment protractor

Your turntable or tonearm manufacturer's alignment protractor is often the best one to use for cartridge alignment. If you don't have one, or want to experiment, there's no more cost-effective way than to use this one from Ortofon.  Your alignment...

Ortofon Libelle spirit level

The Ortofon Libelle is a bubble spirit level used for anything you need perfectly level. It's especially good for turntable levelling as it's very compact (great for skeletal turntables where you want to level the plinth or sub-chassis first).  The...

Michell turntable bearing oil

Genuine Michell bearing oil. We use a proprietary synthetic oil to lubricate the main bearing in all our turntables. The oil has to be a precise viscosity to enable our inverted bearings to circulate the oil correctly.

VPI Crosscheck turntable level

Level your turntable with VPI's Crosscheck Turntable Level.  Leveling a turntable is essential to ensure proper performance. The platter's constant speed, cartridge's tracking ability and the tonearm's smooth motion can all be affected if the...

Pro-Ject Brush It Carbon Fibre Record Cleaning Brush

The Pro-Ject Brush It record brush is a quick and easy tool to use, perfect for cleaning your records of dust. The Brush It is an anti static brush, helping remove lint and dust from your records before playback.  An essential tool for any...

VPI headshell weight

The VPI Headshell Weight, designed for use with VPI JMW tonearms, allows lighter cartridges to be used on heavy tonearms, such as the 10" and longer JMW tonearms. The 3 gram headshell weight may also be used on very...

VPI tonearm damping fluid

The VPI JMW Tonearm Damping Fluid for all VPI JMW Style tonearms. 30ml bottle. 

Michell Finger locking nut

The Michell finger locking nut allows you to secure your Rega tonearm in place without the need for spanners or grips.Can be used in conjunction with VTA Adjuster 1 kit.*compatible with Rega tonearms and derivatives using a threaded base, such as the...

VPI cork mat

The self-stick VPI Cork Mat is made to replace the mat on a VPI 16.5 or 17F cleaning machine. It can also be used as a replacement mat on many turntable platters. The most common use is as an extra clean cork mat to put on your record cleaning machine...

VPI replacement drive belts

Standard Replacement Drive Belts For VPI Turntables This is an OEM Replacement for VPI turntables.  Price is for 1, or 1 full set of belts to suit.  Single belt models = $57 each Multi-belt models = $73 per full kit   Note: Aries...

VPI Magic Lube bearing grease

Keep Your VPI Table Spinning Freely With Super Lube!  Super Lube is the same bearing grease used on all VPI turntables, only a very small amount is necessary to maintain optimum performance.

SOTA Drive Belts

Worn belts are the largest contributor to turntable speed fluctuations which destroy your soundstage and cause pitch instability. Use our genuine SOTA drive belt for best results on your SOTA turntable.  Select your model to display pricing...

Michell turntable replacement belt

Michell genuine replacement drive belt to fit all Michell turntables (TecnoDec, Gyro, Gyrodec and Orbe). 

Michell VTA kit

Vertical Tracking Adjuster kits for Michell turntables. Select from the drop-down menu which version you need; VTA 1, 2 or 3.  The Michell VTA adjuster allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what...

Michell arm plate decoupling kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers. The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer...

VPI periphery ring belts

The belts on the VPI periphery clamp will over time wear out, replace them with these.  Two belts are included in this package.