Accessories

SOTA Reflex LP Clamp

The SOTA Reflex Clamp is a unique, compound action clamp, which works like no other record holding device.  Designed for use with any turntable having a conventional (non-removable) spindle. The SOTA Reflex Clamp is easy to use, and from our...

VPI HW-40 feet

Turn your legacy product anew with a simple at home upgrade. These are a great aesthetic match to the platter itself (presenting as mini platter shapes!), as well as containing a specifically selected foam interface to your rack for improved compliance...

VPI 300rpm motor upgrade kit

Now you can upgrade your Scout, Aries 1 or TNT's current motor to the new lower noise & vibration 300 rpm motor used on the Scoutmaster, Aries2, TNT6 and HRX turntables. This upgrade gives a substantial improvement over your current VPI motor.This...

Furutech Monza LP Weight/Stabilizer

Keep your LPs flat as they play, and damp the surface for improved playback. The beautifully finished precision machined nonmagnetic stainless steel base and top modules are girdled by a layer of damping carbon fibre. The bottom surface is covered with...

Michell Iso Base turntable plinth

Designed for the Michell Orbe SE, Gyro SE and TecnoDec, the Iso Base is the ideal platform to place your Michell turntable. Its inert material characteristic combined with the tenderfeet give it the extra isolation that is necessary for the very best...

Michell Secure Cover

Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust.  

Stillpoints LPI V2 record weight

The Stillpoints LPI V2 slips over the spindle of your turntable and rests on the label portion of the LP. This mechanism absorbs the micro vibrations that are present at the label area, which allows the cartridge to reproduce what is pressed on the...

VPI Prime aluminium platter and bearing

Give Your VPI a facelift or performance boost!   VPI owners can now upgrade their older platters to the awesome 2-inch thick aluminium platter used on the Prime (and previous Classic range).  Adding the new...

Michell HR power supply upgrade

The HR Power Supply is a low-noise electronic power source for the DC motors as found on the Michell TecnoDec, GyroDec and Gyro SE turntables.Adding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and...

Michell Orbe platter upgrade kit

The Michell Orbe Platter Kit offers owners of GyroDecs and Gyro SEs the opportunity to take their turntables to the next level. Comprehensive kit includes: 60mm thick extra heavy impedance-matched platter Screw-down record clamp, compatible with...

VPI Avenger Reference feet

These footers offer an improved amount of compliance for your VPI turntable. With the ability to fit all models, this is a great upgrade that you can take with you should you climb the VPI turntable ladder!  Available in a 3-pack to suit the...

VPI ADS motor drive

VPI offers their Analogue Drive System unit to really lock in the speed of your VPI turntable, with speed adjustments available via the front dial, and push-button speed switching (33.3 to 45rpm). The VPI ADS design includes two pure analog frequency...

VPI Periphery Ring Clamp

Improve the Performance of Any VPI Table  The Outer Ring Clamp greatly improves the performance of VPI turntables by flattening the outer edges of LPs, increasing the cartridge’s tracking ability, removing resonance and aiding...

VPI JMW 3D armwand 10"

VPI JMW 3D Armwand Built on a State-of-the-Art 3D printing machine, the VPI JMW Classic 3D Armwand marks the biggest advance in tonearm technology in five decades. Golden Ear Award-Winner, sounds unbelievably realistic. VPI JMW Classic 3D Armwand...

VPI JMW 3D armwand 12"

VPI JMW 3D Armwand Built on a State-of-the-Art 3D printing machine, the VPI JMW Classic 3D Armwand marks the biggest advance in tonearm technology in five decades. Golden Ear Award-Winner, sounds unbelievably realistic. VPI JMW Classic 3D Armwand...

VPI Fatboy tonearm

The VPI Fatboy Tonearm is available both in a Uni-Pivot style and a Gimbaled style and in all lengths (9, 10.5, 12" - no price difference). The Fatboy can be used with VPI's current production turntables and their legacy turntables that support their...