Product Description
The EgglestonWorks Ivy is the Reference speaker whose development was truly based on being just that: a reference. Developed with legendary mastering engineer, Bob Ludwig, the Ivy continues to be the Reference in the main studio at Gateway Mastering Studio. Years of proven performance superiority and 22 drivers per channel ensure that it is the ultimate Reference in any system.
The Ivy Signature Series takes the best of the Ivy and tweaks it with custom finishing/aluminum plates, carbon fiber drivers, upgraded crossover parts and other proprietary improvements.
Tweeter: 1″ cloth dome. Tweeter has a large-diameter vent on its pole piece and a big aperiodic damping chamber that imitates an infinite baffle loading. The size of the pole piece across the driver surface area, increases linearity and power handling, while having exemplary frequency response. The tweeters are manufactured on a special production line under laboratory conditions.
Mid-bass: Twelve 6″ double-magnet driver, with a 3″ voice coil diameter. Extremely rigid structural physics and the piston-like action of this driver produce exceptionally quick transients and a complete absence of coloration. These drivers are run full-range in four independently tuned transmission lines. Each transmission line contains three drivers in a pressure driven design, mounted front to back. The rear drivers reduce backpressure on the baffle-mounted drivers, simulating a free air resonance while simultaneously increasing linearity and power handling.
Bass: Six 12” woofers loaded in parallel chambers in pressure driven configuration. The rear drivers reduce backpressure on the baffle-mounted drivers, simulating a free air resonance while simultaneously increasing linearity and power handling. The rear drivers are vented out the back of the enclosure through 4″ ports.
Enclosure: The extremely heavy enclosure becomes slightly wider as the speaker gets deeper on the bass enclosure and slightly narrower on the high frequency section. This minimises parallel wall interactions, while increasing rigidity and stability.
- Internal wiring is manufactured by Transparent Audio.
- Single Cardas rhodium binding posts.
- Side panels and baffle plates are solid aluminum.
- Special designed castors are permanently mounted to the base and are an integral pert of the design.
Specifications:
| Frequency Response: | 13Hz - 24kHz (-3dB) |
| Woofers: | 6x 12", 12x 6" |
| Tweeter: | 1" Textile Dome |
| Sensitivity: | 88dB (1w / 1m) |
| Impedance: | 7 Ohms (min 5ohm) |
| Dimensions (no stand): | 193 x 46 x 92cm (HxWxD) |
| Weight: | 720Kg (pair) |
