The VPI Player is an all in one turntable. It comes complete with a phonostage, pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. It is the perfect solution to enjoying your records! It also has standard RCA connections providing the ability to connect to a standard amplifier and desktop/floor standing speakers.
This turntable is also extremely easy to setup. We have done it in under 60 seconds from lifting the lid to playing!
The Player turntable is a precision instrument that has been thoroughly tested to create the musical experience you're looking for! It is available in two finishes: Hard Rock Maple and Mocha Walnut.
1.25”" thick textured vinyl covered non-resonant MDF chassis
Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling
The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft
New 9” vertical Yoke type tonearm with lateral turntable type bearing
Pivot to spindle: 223mm
Effective length: 240.7mm
Offset angle: 22.85 degrees
Average RMS distortion: .36%
VTA adjustable arm mount
Damped stainless steel armtube
Very pure copper wire, twisted with special insulating jacket
The armbase is upgradeable to a standard JMW 9 arm
|Type:||Belt drive, 33.3 plus 45rpm|
|Motor:||24v Synchronous AC motor|
|Wow and Flutter:||0.06% WOW, 0.04% Flutter|
|Rumble:||< -80dB (IEC 98A Unweighted)|
|Effective arm length:||251.4mm (9.9")|
|Cartridge:||Ortofon 2M Red (5.5mV)|
|Headphone output:||395mW at 150ohm, 165mW at 32ohm|
|Dimensions:||109 x 470 x 343mm (HxWxD)|
|Krispy Audio is the exclusive official agent/importer/distributor for VPI Industries in Australia.|